Umbrella Roofing Systems

Commercial, Industrial and Metal Roofing Specialist

724-758-7663 / 877-837-4137
724-758-5459
OVER 6,500,000 SQ. FT. INSTALLED

Duro-Shield®: The Metal Retrofit Roofing System

Are rusted roof decks and leaky seams starting to compromise your building's watertight integrity?

The Duro-Shield metal retrofit roofing system for sloped roofs is the long-term way to protect your building against rain, temperature changes, interior drips, ice build-up, and rust and corrosion. The Duro-Shield single-ply membrane is prefabricated in our factory; custom designed to fit your metal roof exactly, eliminating up to 80-85% of rooftop installation labor. Our metal retrofit solution keeps Mother Nature outside, while your inventory, equipment, and workers stay safe and dry inside.

The Duro-Shield metal retrofit system is also energy-efficient, resistant to chemicals, fire and high winds, and virtually maintenance-free.

If time has caught up with your metal roof, it's time you consider the Duro-Shield roofing system. Contact us to find out how a Duro-Shield metal retrofit roofing system can help you lock out leaks and lock in your investment.

There are good reasons to choose metal roofing, including lower initial installation costs and superior protection against fire.

But time catches up with everything, including metal roofs. Years of exposure to the elements, hot and cold extremes, and rust and corrosion can combine to compromise your metal roof's integrity.

In fact, if your metal roof is more than a few years old, you probably know the frustration of leaky buildings and escalating maintenance costs.

And you're not alone. With over 60 billion square feet of metal roofing in place in the United States and two billion more installed each year, that adds up to a lot of leaks - and a lot of money spent fighting them.

A Closer Look at Metal Roof Problems

Unfortunately, metal roofs are susceptible to a number of problems that lead to leaks and larger repair and maintenance budgets. These are some of the most common:

  • Loose seams and cracked penetrations. Roofs expand and contract with the weather. Because metal roofs are made of rigid sheets fastened together, this expanding and contracting loosens screws, pulls at seams, and causes cracks to form around stacks and other penetrations.
  • Rust and corrosion. Everyone knows what moisture does to steel. Snow, rainfall, and ponding water eventually cause rust and corrosion to form and holes to appear.
  • Interior Drips. Cold temperatures chill inadequately insulated metal, causing warmer moisture vapor on the building to collect as water or frost on the underside of steel roofing panels. This condensation effect can cause dripping inside, even when the weather is dry outside. And the problem is compounded when oxidation occurs and rust forms on the inside of the building.
  • Ice build-up. Ice build-up in gutters can block water from properly draining off the roof during a thaw, creating a drainage back-up and providing more opportunities for moisture to enter through a roof's seams.

Aging Metal Roof Solutions

There are several solutions to the problems caused by aging metal roofs, each with advantages and disadvantages.

  • Sealing and coating. The first and least expensive option is to re-seal exposed seams and apply a waterproof coating. But this method only protects against rain and only temporarily. That's because the roof continues to expand and contract, eventually rupturing the new seals and the coating.
  • Spray-on foam and sealant. The second option is to insulate the metal roof with a spray-on urethane foam and then apply a sealant. This method helps protect against rain as well as interior drips. But the irregular surfaces of foam coatings are notorious for collecting water. That's one reason that most warranties for spray-on foam do not cover damages due to ponding water.
  • Roof replacement. The third option is to completely replace the roof with new insulation and new steel. This option addresses all the problems-until they begin again, since a new metal roof will have the same characteristics as the old roof. This option is also costly, involves the use of heavy equipment, and is disruptive to a building's normal operations, often exposing the building contents to the elements while work is performed.

Are there any other options?

Wouldn't it be great if, instead of fixing or replacing your metal roof, you could install a new, long-lasting roof system right over your current roof without an expensive tear-off? Good news. You can with the Duro-Shield metal retrofit roofing system from Duro-Last. The Duro-Shield roofing system is the cost-effective, long-term way to protect your building against rain, temperature changes, interior drips, ice build-up, as well as rust and corrosion-guaranteed.

.